Creatif Logo
Contact us creatif
Products / Focus / Acoustic-Art

Acoustic aRT « Bespoke Acoustic Printed Panels »


Acoustic aRT Panels comprise aluminium frames cut and mitred to a precise size with an acoustic foam infill and tensioned polyester fabric face.

The silver anodized aluminium frame is lightweight, fast to assemble, durable, eco-friendly and infinitely reusable. Acoustic aRT can also be applied as a finishing option for our market-leading Solo moving walls.

Fabric panels can feature images from our library or bespoke artwork incorporating photography, illustrations, text or combinations. The fabric panels are then very simply installed by pushing the silicone bead home into a slot in the frame. No tools are required for this process and the installation technique is quickly acquired.

The fabric is ultra-tough and unaffected by impact and humidity; it willnot crack, chip, dent or tear. Fabric panels can be replaced in minutes for cleaning or replacement. The inks used in the printing process are water-based with no VOCs and the fabric itself is 100% recyclable.

 

 

Frame Specifications

» 16mm deep aluminium profile in natural silver anodised finish
» Option to powder coat to RAL colour
» Sizes from 400mm x 400mm to 10m x 3.1m
» No back board required
» Generally delivered in kit form for building on-site with 3mm Allen key
» 14x4mm channel to face of profile to accept tension fabric graphic with frameless look
» Acoustic core as required

Fixing Reccomendations

» Screw through the frame return on all four edges at approximately 500mm centres
» Applications where fewer fixing points are available are not suitable due to lack of rigidity

Graphics Specifications

» Coated fine woven 135gsm polyester fabric
» Ink-jet printed with UV flexible inks
» Stitched at edge with 15x3mm silicone strip
» When setting up artwork, allow 15mm bleed at final size (or equivalent when working below final size) on all four edges. File formats: Illustrator, InDesign, high resolution PDF, all 200dpi minimum at final size

 

 

Frame Specifications

» 21mm deep aluminium profile in natural silver anodised finish
» Option to powder coat to RAL colour
» Sizes from 400mm x 400mm to 25m x 3.1m
» No back board required
» Generally delivered in kit form for building on site with 3mm Allen key
» Can accept cross-beam to increase rigidity for sizes where fixing points are spaced by more than 2m
» 14x4mm channel to face of profile to accept tension fabric graphic with frameless look
» Acoustic core as required

Fixing Reccomendations

» Screw through the frame return on all four edges at approximately 500mm centres
» Applications where fewer fixing points are available are not suitable due to lack of rigidity

Graphics Specifications

» Coated fine woven 135gsm polyester fabric
» Ink-jet printed with UV flexible inks
» Stitched at edge with 15x3mm silicone strip
» When setting up artwork, allow 15mm bleed at final size (or equivalent when working below final size) on all four edges. File formats: Illustrator, InDesign, high resolution PDF, all 200dpi minimum at final size

 

 

Frame Specifications

» 45mm deep aluminium profile in natural silver anodised finish
» Option to powder coat to RAL colour
» Sizes from 400mm x 400mm to 15m x 3.1m
» No back board required
» Generally delivered in kit form for building on site with 3mm Allen key
» Can accept cross-beam to increase rigidity for spans of more than 2m
» 14x4mm channel to both faces of profile accept tension fabric graphic with frameless look to both sides
» Can be curved and S-bent with radius down to a minimum of 500mm
» Can be used to make 3D products such as hanging canopies with use of 3-way, 90 degree corner joints and one of our vertical profiles

Fixing Reccomendations

» For freestanding applications, a selection of steel feet which bolt through centre channel of profile are available
» Can be attached to shell scheme type system or hung by drilling through the outside wall of the profile to reveal internal 13x4mm connection channel

Graphics Specifications

» Coated fine woven 135gsm polyester fabric
» Ink-jet printed with UV flexible inks
» Stitched at edge with 15x3mm silicone strip
» When setting up artwork, allow 15mm bleed at final size (or equivalent when working below final size) on all four edges. File formats: Illustrator, InDesign, high resolution PDF, all 200dpi minimum at final size

 

Please register to access our downloads section where you will find useful material including: product and company information, case studies and technical information.
If you have a pop up blocker on your browser this download with not open.

Register close